2020 Hoyt Axius Ultra Bow Package- 60 to 70 lb- 3 cam- 30 to 32"- Storm and Black
For more detailed photos and a full item description please click on the link provided below:
Bare bow alone carries a $1250 MSRP!!
This bow was used through this current archery season. It has been well cared for in that time.
As those of you who are in need of a bow that reaches to anything near this 32 inch draw length, there just are not many around at all!
Bow Specifics:
- 34" axle to axle
- 334 fps ATA
- 6 and 3/4" brace height
- 4.6 lbs (bare bow only)
- 85% letoff
Here are the detailed specifics:
-Right Handed
-The bow is set up with #3 ZTR cams. The bow is currently set up at 31 inches in draw length. With the #3 ZTR cams, this bow is able to be set at 30 through 32 inches in half inch increments ONLY.
Please just let me know where you would like it to be set and I can be sure to do that for you prior to shipment.
-The riser of the bow is in the factory Storm finish- a very popular grey finish from Hoyt.
-70 pound limbs in factory Black finish. They will adjust from 58 to just under 75 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The string set is the original factory set of Fuse from Hoyt. They have been used since new, and I would rate them an 8 of 10.
-The current sight will be eliminated and excluded from the bow package.
A new Trophy Ridge React One Pro sight will be installed and included.
-The rest is a Hoyt model QAD Ultra Pro Series series drop away in black finish. This rest is made in incorporation of Hoyt and QAD and carries the Hoyt name and logo as can be seen in the photos. This is NOT the integrated model. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through Hoyt and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $170.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The green discs are currently installed, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter XT 300 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******