Used LEFT Handed Hoyt Carbon RX-3 Bow Package- #2 cam-60 to 70 lb-REDWRX-RX3
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1699 before tax!!
Add all of the great accessories here, and you can see just how much you are saving!
This bow was used through a few states last season.
It shows more cosmetic wear than is typical for a one year old bow, but all wear is cosmetic only.
New string set was installed just before the bow was traded in.
As those of you know who have been looking, bows in general are extremely tough to find right now. Add to that the fact that this is a high end left handed #2 cam Hoyt, and it becomes that much more difficult to find again any time soon!
Bow Specifics:
- 30.5" axle to axle
- 342 fps ATA
- 6" brace height
- 3.9 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-The bow is set up with #2 ZT Pro cams. The bow is currently set up at 28 inches in draw length. With the #2 ZT Pro cams, this bow is able to be set at 25 through 28 inches ONLY.
Please just let me know at what draw length you would like the bow set upon making your purchase and I will set the draw length for you at no additional charge.
-The riser of the bow is in the factory Kuiu Verde finish.
-70 pound limbs in factory Kuiu Verde finish. They will adjust from 58 to 73 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-No peep sight has ever been installed in the new string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has ever been installed on the new string. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Hybrid Dampener in the sight to help further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a QAD Ultra HDX Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $140.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in Black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The green discs are currently installed, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by Easton/Beman (as many of you know, Easton bought out the Beman compaany years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400, 340 or 300 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 300, 340 or 400 spine-These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm (carbon arrows) in 300, 340 or 400 spine-These are an additional $70 over the currently listed arrows..
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Fuse Blade XT 6 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
- Hoyt REDWRX soft case is included.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******