Loaded Mathews Triax Bow Package - Most DL Avail - 60 to 70 lb- Lost XD Camo
For more detailed photos and a full item description please click on the link provided below:
This bow has been used through last archery season very sparingly. The original owner primarily used a crossbow through the season so this bow saw very little use.
- approximately 28" axle to axle
- 6" brace height
- up to 343 fps IBO
- 4.4 lbs (bare bow only)
Here are the specifics:
-Currently the bow is set up with 28 inch, 85% letoff modules. The draw length can only be changed by changing the mods on the bow.
This bow can be set up anywhere from 24.5 through 30 inches in draw length when the correct draw modules are installed. I have nearly every draw length in 85% letoff in stock, so can set this bow up anywhere in that range for you prior to shipping the bow out to you- 25, 25.5, 26, 26.5, 27, 27.5, 28, 28.5, 29, 29.5 or 30".
Please just let me know at what draw length you would like it set upon purchasing the bow.
ONLY ONE set of draw modules will be included with the purchase at this price.
-70 pound limbs in factory Mathews Lost XD camo finish. The limbs are currently topping out at just over 74 pounds on my scale and can be set as low as 58 pounds (though the peak weight may change with a change in draw length).
-The riser of the bow is in factory Mathews Lost XD camo finish.
-The string and cable are in good used condition. They are a custom set from Pure Perfexction. They were installed about a 6 months ago, and I would rate them an easy 8.5 of 10.
-Peep sight installed, served into place and is ready to shoot.
-string loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in matching Mathews Lost XD camo finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is an Axion GLX Silencer 5 inch in Mathews Lost XD finish. This is a nice stabilizer in both look and function. As can be seen, it has two Mathews Harmonic dampeners as well as one Mathews Harmonic Stabilizer in the end of it. It matches everything about the bow very well.
-The rest is a Mathews edition QAD Ultra Pro series drop away in Mathews Lost XD camo finish. This rest carries the Mathews name and is made in incorporation of both the Mathews and QAD companies. There was originally a Mathews Harmonic Dampener that would have covered the mounting area of this rest, but as you can see it is not there and will not be included. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away. This is one of the only rests that do this as most other models reset when the bow is drawn. This rest will not drop away until the bow has been shot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by Easton/Beman (as many of you know, Easton bought out the Beman compaany years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400, 340 or 300 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 300, 340 or 400 spine-These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm (carbon arrows) in 300, 340 or 400 spine-These are an additional $70 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Mathews Lost XD camo and black finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******