Loaded, Hoyt Carbon Element Bow Package- 29", 60 to 70 lb -Camo
For more detailed photos and a full item description please click on the link provided below:
This bow is in as nice of used condition as I have seen this model in quite some time.
It has been used and hunted sparingly, but has sat the last couple years as primarily a backup with a new string set installed last year.
- approximately 32" axle to axle
- 7" brace height
- 3.6 lbs (bare bow only)
Detailed Item specifics:
-The bow is set up with #3 Fuel cams. The bow is currently set up at 29 inches in draw length.
With the #3 Fuel cams, this bow is able to be set from 28 through 30 inches in any half inch increment.
This is done by changing the module set on the bow.
I HAVE NO OTHER MODULES FOR THIS BOW.
The bow will be shipped at 29 inches in draw length ONLY.
-The riser of the bow is in the factory camo finish.
-70 pound limbs in factory camo finish. They will adjust from 58 to just over 72pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in very nice used condition as they are only about a year old. I would rate them an easy 9 of 10.
-Peep sight is installed, served into place, and is ready to shoot.
-string loop is installed and ready to shoot.
-The sight is an Axion 5 pin in black finish. All pins are in .019 size. There is also a sight light included. This rheostat light shines only on the extended fibers of the pins, so does not create any halo of light when shooting in low light situations.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a used QAD Ultr Hunter in finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by the Easton/Beman company (as most of you likely know Easton purchased Beman years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 400, 340 or 300 spines-These are an additional $85 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree Xtra camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Realtree camo and black finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******