- Storefront
- >
- Right Handed 60 to 70 Pound Bow Packages
- >
- Loaded, Hoyt Carbon Spyder Turbo ZT Bow Package- 26 to 28"- Black
Loaded, Hoyt Carbon Spyder Turbo ZT Bow Package- 26 to 28"- Black
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1549 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow is in nice used condition. It shows far less cosmetic wear from the past 5 years it has been hunted than most bows of its age as it has been very well cared for. A new set of limbs was installed on the bow a little over a year ago.
Bow Specifics:
- 33" axle to axle
- 6" brace height
- 3.8 lbs (bare bow only)
- 350 fps IBO speed
Here are the specifics:
-Right Handed
-The bow is set up with #2 Turbo cams. The bow is currently set up at 27.5 inches in draw length. With the #2 Turbo cams, this bow is able to be set at 26, 26.5, 27, 27.5 or 28 inches ONLY. This is done by changing the module set on the bow.
Please let me know where you would like it to be set and I will be sure to set the draw length for you prior to shipment.
ONE set of modules of your choice will be installed on the bow.
Individual module sets are not available for purchase unless purchasing the full bow package.
-The riser of the bow is in the factory Black finish.
-70 pound limbs in factory black finish. These limbs were installed on the bow a little over a year ago and are in fantastic condition. They will adjust from 58 to just over 70 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-Zero Torque cable guard helps eliminate unwanted torque from the bow when shooting.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in very good used condition. They are a custom set installed a little over a year ago, at the same time as the new limbs. I would rate the set an 8.5 to 9 of 10.
-Peep sight is installed, served into place, and is ready to shoot.
-string loop is installed and ready to shoot.
-The sight is a Brand New Fuse Cybex 3 pin in black finish. All 3 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a camo QAD HDX Ultra Pro. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro models have a lock down feature to prevent the launcher from vibrating or bouncing back up after the shot. All Pro models also carry a LifeTime Warranty through the QAD company.
MSRP on the rest when new was $150.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, Easton 5mm FMJ in 340 spine will be included at the listed pricing.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree Xtra camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Blade XT 4 arrow quiver in matching Realtree Xtra and Black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******