- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- Hoyt Right Hand 70 Pound Bow Packages
- >
- Loaded, Hoyt Carbon Spyder Turbo ZT Bow Package- #3 Cam - 28 to 30"- Black
Loaded, Hoyt Carbon Spyder Turbo ZT Bow Package- #3 Cam - 28 to 30"- Black
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1549 before tax or a single accessory was added!!
This bow is in very nice used condition.
It shows far less cosmetic wear than most bows of its age as it has been very well cared for.
As those of you who have been looking for this model are no doubt aware, they are extremely difficult to find- especially in this kind of condition.
Those who own them simply do not give them up often.
Bow Specifics:
- 33" axle to axle
- 6" brace height
- 3.8 lbs (bare bow only)
- 350 fps IBO speed
Here are the specifics:
-Right Handed
-The bow is set up with #3 Turbo cams. The bow is currently set up at 28.5 inches in draw length. With the #2 Turbo cams, this bow is able to be set at 28, 28.5, 29, 29.5 or 30 inches ONLY. This is done by changing the module set on the bow.
Please let me know where you would like it to be set and I will be sure to set the draw length for you prior to shipment.
ONE set of modules of your choice will be installed on the bow.
Individual module sets are not available for purchase unless purchasing the full bow package.
-The riser of the bow is in the factory Black finish.
-70 pound limbs in factory black finish. They will adjust from 58 to just over 72 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-Zero Torque cable guard helps eliminate unwanted torque from the bow when shooting.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in very good used condition. They are a factory set installed a little less than a year ago. I would rate the set a 9 of 10.
-Peep sight is installed, served into place, and is ready to shoot.
-string loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 400, 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in matching Black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******
If you would be interested in adding a case to the bow package, this bow can ship in a new Plano Parallel Limb bow case for an additional $110 (that covers both the cost of the case and the additional shipping cost as the size and weight will increase driving the shipping up).