Loaded Mathews Traverse Bow Package - Most DL - 60 to 70 lb- Stone Tactical
For more detailed photos and a full item description please click on the link provided below:
This bow is in as nice of shape as used bows get. As those of you who have been looking are no doubt aware, this model is extremely difficult to find.
- approximately 33" axle to axle
- 6.625" brace height
- up to 338 fps IBO
- 4.7 lbs (bare bow only)
Detailed Item specifics:
-Currently the bow is currently set up with 29 inch, 85% letoff modules. The draw length can only be changed by changing the mods on the bow.
This bow can be set up anywhere from 26.5 through 32.5 inches in draw length when the correct draw modules are installed. I have every draw length in 85% letoff in stock, so can set this bow up anywhere in- 26.5, 27, 27.5, 28, 28.5, 29, 29.5, 30, 30.5, 31, 31.5 or 32".
Please just let me know at what draw length you would like it set upon purchasing the bow.
ONLY ONE set of draw modules will be included with the purchase at this price.
-70 pound limbs in factory Stone Tactical finish. The limbs are currently topping out at 73 pounds on my scale and can be set as low as 58 pounds (though changing the draw length may change the peak draw weight as well).
-The riser of the bow is in factory Stone Tactical finish.
-Custom grip from UltraView, the Chris Bee model with blue accents as can be seen, is installed and included. This grip is meant to help eliminated torque to therefor increase accuracy down range, and also gives the bow a nice custom look! The grip was $80 installed.
-The string and cable are in extremely nice used condition. They are a custom set from GAS in black and blue colors that have been used for about three months now and were nearly $200 installed. I would rate them a 9 of 10 in condition.
-Hamskea peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-Bomar Nose Button is installed and included.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I also have many other sights should you want something other than this one. Please just either send me a message or call to inquire about the sight you are interested in and I can let you know if I have it available and what, if any, difference in price there will be.
-The stabilizer is an Axion GLX Silencer 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has two Mathews Harmonic dampeners as well as one Mathews Harmonic Stabilizer in the end of it. It matches everything about the bow very well.
-The rest is a QAD Ultra HDX Pro Series series drop away in Blue . The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $150.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******