Loaded Mathews Traverse Bow Package- 60 to 70 lb, Realtree Edge Camo, Right Hand
For more detailed photos and a full item description please click on the link provided below:
This bow is in nice used shape. It has been used through three archery seasons, but you would be hard pressed to tell it.
As those of you who have been looking are no doubt aware, this model is very sought after and extremely difficult to find.
Bow Specifics:
- approximately 33" axle to axle
- 6.625" brace height
- up to 338 fps IBO
- 4.7 lbs (bare bow only)
Detailed Item specifics:
-RIGHT Handed
-Currently the bow is currently set up with 30.5 inch, 85% letoff modules. The draw length can only be changed by changing the mods on the bow.
This bow can be set up anywhere from 26.5 through 32.5 inches in draw length when the correct draw modules are installed. I have every draw length in 85% letoff in stock, so can set this bow up anywhere in- 26.5, 27, 27.5, 28, 28.5, 29, 29.5, 30, 30.5, 31, 31.5 or 32".
Please just let me know at what draw length you would like it set upon purchasing the bow.
ONLY ONE set of draw modules will be included with the purchase at this price.
-70 pound limbs in factory Realtree Edge Camo finish. The limbs are currently topping out at nearly 74 pounds on my scale and can be set as low as 58 pounds (though changing the draw length may change the peak draw weight as well).
-The riser of the bow is in factory Realtree Edge Camo finish.
-The string and cable are in very nice used condition. They are a factory set of Zebra Trophy from Mathews. I would rate them an 8.5 to 9 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Fuse Cybex XT 5 pin micro adjust in matching Realtree Edge Camo finish. Very nice sight. 5 Precision steel pins, all in .019 size. Micro click adjustment knobs for both windage and elevation allow for easy and precise adjustments. The sight has second and third axis adjustability. There are 8 interchangeable colored Stealth Bands that are included (the green is currently installed as can be seen in the photos). There is also a rheostat light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Fuse Frontline Carbon 6 inch in Realtree Edge camo and black finish. This is a new stabilizer from Fuse (Hoyt) for 2022. It has a new sleek design that helps to both eliminate wind drag and better steady the bow at full draw. There are weights at the end of the stabilizer that can be removed or added to in order to customize the weight of your stabilizer to your shooting preferences. The total current weight of the stabilizer is approximately 4.6 ounces, though again you could change this by removing or adding to the end weights (other weights sold separately and not included here). The stabilizer is constructed of lightweight carbon and machined aluminum.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with
the bow. If you would prefer to have a different rest, please just
contact me by email or phone and I can work something out with you to set this
bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 300 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in Realtree Edge camo and black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******