Loaded Right Hand Mathews Vertix Bow Package- Under Armour Forest -Many Dl/DW
For more detailed photos and a full item description please click on the link provided below:
The bow was set up for the first time for the photos you see here. It is left over stock, never sold and never shot.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
- approximately 30" axle to axle
- 6" brace height
- up to 343 fps IBO
- 4.67 lbs (bare bow only)
Here are the detailed specifics:
-Currently the bow is set up with 28 inch, 85% letoff, 70 pound modules (actually topping out at nearly 73 pounds on my scale).
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 26 through 30.5 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 60, 65, 70 or 75 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I have modules in stock to set this bow at the following:
30.5"/75 lb in 85% letoff
30"/70 lb in 85% letoff
30"/65 lb in 85% letoff
29.5"/70 lb in 85% letoff
29"/75 lb in 85% letoff
29"/70 lb in 85% letoff
28"/75 lb in 85% letoff
28"/70 lb in 85% letoff
28"/60 lb in 85% letoff
27.5"/70 lb in 85% letoff
27.5"/65 lb in 85% letoff
27.5"/60 lb in 85% letoff
27"/70 lb in 85% letoff
27"/60 lb in 85% letoff
26.5"/65 lb in 85% letoff
26.5"/60 lb in 85% letoff
26"/60 lb in 85% letoff
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included.
-The limbs are in Factory Under Armour Forest finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
Currently it is maxing at just over 73 pounds.
-The riser of the bow is in Factory Under Armour Forest finish.
-The new Engage grip from Mathews is fantastic, and a great improvement over an already fantastic grip in the previous models.
-The string and cable set are in perfect shape as they have never been setup and the bow has never been shot. They are the original factory set of Zebra Trophy from Mathews.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
MSRP on the sight is $110.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The matching Green discs have been installed to match the rest of the bow, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-The rest is a Brand New QAD HDX Ultra Pro series drop away in black finish. This rest was used one season on another bow and is in very nice condition. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. The launcher on the rest will lock in the down position after the shot to prevent any vibration or bounce back of the launcher toward the arrow.
This rest also carries a LifeTime Warranty through QAD.
The rest is all set up and ready to shoot.
MSRP on the rest when new was $140.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by Easton/Beman (as many of you know, Easton bought out the Beman compaany years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400, 340 or 300 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 300, 340 or 400 spine-These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm (carbon arrows) in 300, 340 or 400 spine-These are an additional $70 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-New Mathews hat and a Mathews owner's manual are included.
-All of this will be shipped in a Brand New Vertix soft bow case from OMP. It offers nice padding and protection for a soft case, many zippered storage pockets to store your accessories, an arrow pouch to hold all of your arrows, a carry handle, a shoulder strap, and carries the Mathews logo and Vertix name.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******