NEW, Loaded Right Handed Hoyt Ventum PRO 30 Bow Package- 25 to 30", 70 to 80 Lb
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1300 before tax or a single accessory was added!!
This bow is new, unshot, unused in any way. It was set up for the first time for the photos you see here.
As those of you who have been looking for 80 pound bows are no doubt aware, they are very difficult to come by!
Bow Specifics:
- approximately 30" axle to axle
- 342 fps ATA
- 6" brace height
- 80 and/or 85% letoff
- 4.45 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with Hoyt's HBX Pro cams. The bow is currently set up at 28.5 inches in draw length. With the new cam, this bow can be set up anywhere from 25 through 30 inches in draw length with the correct module set installed and set to the correct locations.
Please just let me know what draw length you would like when making your purchase and I will be sure that is where the bow is set at.
The bow is currently set at 85% letoff, but with the new cams and modules it is very simple to change that to 80% for those of you who would need or prefer 80%.
-The riser of the bow is in the factory Buckskin finish.
-80 pound limbs in factory Buckskin finish. They will adjust from 68 to just over 82 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string is the original factory set of Fuse from Hoyt. They are in perfect condition as they have never been set up nor shot, but I can do that for you at no additional cost if you would like me to do so.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has yet been installed, but I can do that for you if you would like for me to do so. Please just let me know that you would like a string loop installed prior to shipment and I will be sure that one is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New TruGlo Veros 5 pin in black finish. Very nice sight. 5 pins, but they are in different sizing. The top 3 pins are in .019, while the bottom two pins are .010 in size. This allows those longer distance pins to cover up less of your target, therefor making them more accurate at longer ranges. 2nd and 3rd axis leveling, Tru-Touch feel coating keeping noise and any reflection of light down, and micro-adjust windage and elevation are just some of the great features of this sight!
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New Hoyt model QAD Ultra Pro Series series drop away in black. This rest is made in incorporation of the QAD and Hoyt companies to work with Hoyt bows. As can be seen it carries the Hoyt name and logo. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $180.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 300 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
********Depending upon your draw length, arrow length, weight of tip and draw weight of the bow you may need something stiffer than a 300 spine********
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-New Hoyt hat, Hoyt owner's manual, Hoyt decals and Hoyt keychain are included.
If you would be interested in purchasing bare bow only, I would sell the bow bare at a price of $1000 (this does not include shipping nor any applicable taxes- tax applied in PA only).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******