Loaded, LEFT Hand Hoyt Carbon RX-3 TURBO Bow Package- #2 cam -70 lb-REDWRX - RX3
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1749 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow was used through this past archery season.
- 31" axle to axle
- 350 fps ATA
- 6" brace height
- 4 lbs (bare bow only)
Here are the specifics:
-The bow is set up with #2 ZT Pro Turbo cams and 26.5 inch draw length modules. With the #2 ZT Pro Turbo cams, this bow is able to be set at 26 through 28 inches ONLY, but does require a different module set to change draw length.
If sold here, I can offer only the 26.5 inch modules as I have no others in stock.
I can get other module sets ordered in, but this will take a few weeks.
-The riser of the bow is in the factory Gore Optifade Subalpine finish.
-70 pound limbs in factory Gore Optifade Subalpine finish. They will adjust from 58 to just over 71 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in nice used condition. They are the original factory set, and I would rate them an 8.5 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop installed and ready to shoot.
-The sight is a Brand New Hoyt Pro Xceed 5 pin microtune in Black finish. All 5 pins are in .019 size. Micro adjustments for both elevation and windage. There is also a rheostat light added to the sight. The light shines only on the fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves. The pins are extremely bright in low light with this color and sight light. There are colored sight rings included with the sight (the white is currently installed, but all are included).
MSRP on the sight when new was $179.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a QAD Ultra HDX Pro Series series drop away in camo finish- I believe Lost camo. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $150.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-24 Easton FMJ arrows in 340 spine with 1 white and 2 red Blazer vanes will be included with the package at this pricing.
The arrows will be set up at 27.5 inches in length (measured from end of arrow to valley of the nock).
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in matching Gore Optifade Subalpine finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The matching Green discs have been installed to match the rest of the bow, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******