Goregeous, Loaded Hoyt Carbon Spyder FX Bow Package- 50 to 60 lb- 27 to 29" Draw
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1500 before tax or a single accessory was added!!
This bow is in extremely nice used condition. It has been very well cared for by the original owner since new.
The limbs were replaced just over a year ago due to a small splinter on one limb.
The owner has even hung onto the owner's manual and original tags that came with the bow when new, and they will be included with the sale for you.
This is the shortest and one of the lightest carbon bows that Hoyt has ever produced.
Bow Specifics:
- approximately 28.5" axle to axle
- 6.75" brace height
- 3.6 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with #3 DFX cams, currently set at 28 inches in draw length. The bow is currently set up at 28.5 inches in draw length.
With the #3 DFX cams, this bow is able to be set at 27, 27.5, 28, 28.5 or 29 inches ONLY.
Please just let me know where in that range you would like the bow set, and I will be sure to set it for you prior to shipment.
-The riser of the bow is in the factory Realtree Xtra camo finish finish. This was a finish offered by Hoyt for only a couple years, and is a difficult one to find any more.
-70 pound limbs in factory Realtree Xtra camo finish. They will adjust from 48 to just over 63 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are a factory set from Hoyt that were installed at the same time as the new limbs, so are just over a year old. I would rate them an 8.5 to 9 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Fuse Cybex XT 5 pin micro adjust in Realtree Edge camo finish. Very nice sight. 5 Precision steel pins, all in .019 size. Micro click adjustment knobs for both windage and elevation allow for easy and precise adjustments. The sight has second and third axis adjustability. There are 8 interchangeable colored Stealth Bands that are included (the green is currently installed as can be seen in the photos). There is also a rheostat light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree Xtra camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Realtree Xtra camo finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is very light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******