Loaded Hoyt Carbon RX-3 Bow Package- 60/70 lb- REDWRX -RX3- 27" to 30" DL- Suba
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1700 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow has been used through three hunting season, but you would be very hard pressed to tell it.
It has very been well cared for in that time.
Bow Specifics:
- 30.5" axle to axle
- 342 fps ATA
- 6" brace height
- 3.9 lbs (bare bow only)
- 85% letoff
Here are the specifics:
-Right Handed
-The bow is set up with #3 ZT Pro cams. The bow is currently set up at 29.5 inches in draw length. With the #3 ZT Pro cams, this bow is able to be set at 27 through 30 inches in half inch increments ONLY.
I can set this bow at 27, 27.5, 28, 28.5, 29, 29.5 or 30 inches in length. Please just let me know what length you need when making your purchase and I will be sure that the bow is set up at that length.
-The riser of the bow is in the factory Gore Optifade Subalpine finish.
-70 pound limbs in factory Gore Optifade Subalpine finish. They will adjust from 58 to just over 74 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The strings are a custom set from 60X Custom Strings that are less than 50 shots old. They were nearly $200 installed, and they are in great used condition. I would rate them an easy 9+ of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Hamskea Hybrid Hunter Pro series drop away in black. This is a fantastic rest. Those of you who know what this rest is already know of all the great features of it.
Here is the information from Hamskea:
Here's a full-capture, cable-driven or limb driven arrow rest that's ideal for bowhunters. V-shaped rest blade insures the arrow is always sitting in the middle.
• Takes design elements from the proven VersaRest™ platform in a more streamline package that is 20% lighter
• Fully adjustable windage and height movements
• Zero Tolerance Technology™ ensures there is no lateral play in the shaft and rotation is silky smooth
• Overmold containment bracket with 3/4 load gate ensures quiet and efficient arrow loading
• Launcher features a proprietary coating to minimize sound and eliminate the need to apply felt
• Launcher shaft rides on dual over-sized sealed stainless steel ball bearings that rotate smoothly shot after shot
• Zero Stop Technology™ ensures repeatable up and down launcher positions
• Spring knob provides multiple internal torsion spring adjustment positions
• 8 sided, non-slip compression clamp design with in-line dampening coil eliminates launcher bounce-back
• Universal non-slip limb pad, heavy duty no-stretch cord and easy adjustment cord clamp
• Universal Limb Clamp assembly can be configured multiple ways: top or bottom limb actuated, cable actuated or cable fall away
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in black finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******