Loaded Mathews Triax Bow Package -Most DL Available- 60 to 70 lb- Lost XD Camo
For more detailed photos and a full item description please click on the link provided below:
This bow has been hunted through two seasons, but you would be very hard pressed to to it. It is in nice used condition and has been well cared for.
- approximately 28" axle to axle
- 6" brace height
- up to 343 fps IBO
- 4.4 lbs (bare bow only)
Here are the specifics:
-Currently the bow is set up with 28 inch, 85% letoff modules. The draw length can only be changed by changing the mods on the bow.
This bow can be set up anywhere from 24.5 through 30 inches in draw length when the correct draw modules are installed. I have nearly every draw length in 85% letoff in stock, so can set this bow up anywhere in that range for you prior to shipping the bow out to you- 25, 25.5, 26, 26.5, 27, 27.5, 28, 28.5, 29, 29.5 or 30".
Please just let me know at what draw length you would like it set upon purchasing the bow.
ONLY ONE set of draw modules will be included with the purchase at this price.
-70 pound limbs in factory Mathews Lost XD camo finish. The limbs are currently topping out at just over 74 pounds on my scale and can be set as low as 58 pounds (though the peak weight may change with a change in draw length).
-The riser of the bow is in factory Mathews Lost XD camo finish.
-The string and cable are in good used condition. They are the original factory set, and I would rate them a 7.5 to 8 of 10.
-Peep sight installed, served into place and is ready to shoot.
-string loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in Mathews Lost XD camo finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is an Axion GLX Silencer 5 inch in Mathews Lost XD finish. This is a nice stabilizer in both look and function. As can be seen, it has two Mathews Harmonic dampeners as well as one Mathews Harmonic Stabilizer in the end of it. It matches everything about the bow very well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Mathews Lost XD camo and black finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******