- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- Loaded, Hoyt Carbon RX-1 Bow Package- #2 cam - 60 to 70 lb - REDWRX - RX1
Loaded, Hoyt Carbon RX-1 Bow Package- #2 cam - 60 to 70 lb - REDWRX - RX1
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1599 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow was used through the past two hunting season.
It shows typical cosmetic wear for a hunting bow of that age, but nothing at all of real note or that would be any issue in function.
The bow has been serviced, including a new string set recently installed, and is ready to go.
Bow Specifics:
- approximately 32" axle to axle
- 340 fps ATA
- 6" brace height
- 3.9 lbs (bare bow only)
- 80% letoff mods installed
Here are the specifics:
-Right Handed
-The bow is set up with #2 ZT cams. The bow is currently set up at 28 inches in draw length. With the #2 ZT cams, this bow is able to be set at 24.5 through 28 inches ONLY.
Please just let me know at what draw length you would like the bow set upon making your purchase and I will set the draw length for you at no additional charge.
-The 85% letoff.
There are 80% mods available for this model for those of you who wish or need those as well.
-The riser of the bow is in the factory Buckskin finish.
-70 pound limbs in factory Black finish. They will adjust from 58 to just over 71 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in good used condition. They are a custom set from VaporTrail that were installed recently. I would rate them an easy 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop installed and ready to shoot.
-The sight is a Brand New Hoyt Pro Xceed 5 pin microtune in Black finish. All 5 pins are in .019 size. Micro adjustments for both elevation and windage. There is also a rheostat light added to the sight. The light shines only on the fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves. The pins are extremely bright in low light with this color and sight light. There are colored sight rings included with the sight (the green has been installed to match this setup, but all are included).
MSRP on the sight when new was $179.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a QAD Ultra HDX Pro Series series drop away in matching black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by Easton/Beman (as many of you know, Easton bought ut the Beman comapany years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 400, 340 or 300 spines-These are an additional $85 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in matching Black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The matching Orange discs have been installed to match the rest of the bow, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******