Loaded Mathews HTR No Cam Bow Package-Lost Camo- NoCam- 60/70- Most DL
For more detailed photos and a full item description please click on the link provided below:
The bow was used through two past archery seasons.
It shows very little wear, and is great overall used condition in every way- including the Winners Choice string set that was just recently installed.
Bow Specifics:
- approximately 32" axle to axle
- 6 and 5/8" brace height
- 4.14 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-Currently the bow is set up with 27.5 inch, 85% letoff modules (actually topping out at 72 pounds on my scale).
The draw length can be changed by changing the mods on the bow.
This bow can be set up anywhere from 24 through 30 inches in draw length with the correct module set installed. All modules I have in stock are in 85% letoff. I have modules to set the bow at any of the available draw lengths for this model = 24, 24.5, 25, 25.5, 26, 26.5, 27, 27.5, 28, 28.5, 29, 29.5 or 30 inches in draw length.
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included.
-The limbs are in factory Mathews Lost OT camo finish. The limbs will adjust from 58 through 72 pounds safely. Please just let me know where you would like the draw weight to be set and I will be sure that it is set prior to shipment.
-The riser of the bow is in Factory Mathews Lost OT camo finish.
-Mathews Focus grip is installed- this is a Mathews torqueless grip intended to help reduce torque when shooting and therefore increase accuracy down range.
-The string and cable set are in very good used shape. They were installed a couple months ago and have fewer than 50 shots on them. They are a Winners Choice set, and I would rate them a very easy 9++ of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is an Axion GLX Silencer Hybrid 5 inch in matching Mathews Lost OT camo finish. This is a nice stabilizer in both look and function. As can be seen, it has hybrid dampeners in it to help reduce noise and vibration when shooting. It matches everything about the bow very well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by Easton/Beman (as many of you know, Easton bought out the Beman compaany years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400, 340 or 300 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 300, 340 or 400 spine-These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm (carbon arrows) in 300, 340 or 400 spine-These are an additional $70 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in matching Mathews Lost OT camo finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
-All of this will be shipped in a Brand New Mathews NoCam soft bow case from Tenzing (part of the Plano Synergy company). As you can see, this is the case made for this model. It offers nice padding and protection for a soft case, a zippered storage pocket to store your accessories, a large front pocket to hold all of your arrows, and carries the Mathews NoCam name.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******