Hoyt Nitrum 34 Bow Package- #2 cam- 60/70 lb- 27 to 29"- Black/Camo - Z5 Cams
For more detailed photos and a full item description please click on the link provided below:
This bow is in as nice of condition as I have seen this model for years now.
It has been used and hunted sparingly, was just full serviced, just had a new string set installed, and it has been well cared for.
As those of you who know this model are no doubt well aware, it is highly regarded as one of the nicest, smoothest drawing, yet fastest bows that Hoyt has ever put out.
This bow has the Z5 cam system, again regarded as many as the best cam that Hoyt has ever produced.
- approximately 34" axle to axle
- 6.75" brace height
- 4.2 lbs (bare bow only)
- 330 fps IBO speed
- Z5 Cam and Half
Here are the specifics:
-The bow is set up with #2 Z5 cams. The bow is currently set up at 29 inches in draw length.
With the #2 Z5 cams, this bow is able to be set at 27, 27.5, 28, 28.5 or 29 inches ONLY.
This is done by changing the module set on the bow.
Please let me know where you would like it to be set and I will be sure to set the draw length for you prior to shipment.
ONE set of modules of your choice will be installed on the bow (some are red and some black in color).
Individual module sets are not available for purchase unless purchasing the full bow package.
-The riser of the bow is in the factory Black finish.
-70 pound limbs in factory Realtree Advantage Max-1 camo finish. They will adjust from 58 to just over 73 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in perfect shape as they are brand new. They have not yet even been set up (though I will do that for you as part of the listed price here). They are a set of Catfish Custom strings in the green and black colors you see in the photos. This string set was over $150 installed, so is a very nice advantage over other used bows you will find!
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Copper John Dead Nuts 3, Mark III 5 pin in camo finish (not an exact match, but as you can see from the photos not bad at all- camo sights are getting extremely difficult to find any more). This sight offers Copper John's speed gap tech for zero pin gap, iron clad fibers to prevent against breakage, ultra bright microDot tech resulting in brighter pins, all metal construction, integrated 3rd axis, and capable of taking a lense. All 5 pins are in .019 size. There is also an AfterBurner blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Realtree Xtra camo finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $120.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******