Loaded Mathews Chill X Bow Package- 60 - 70 lb - UNSHOT - RH - Many DL in stock
For more detailed photos and a full item description please click on the link provided below:
This bow was just acquired through a purchase of a full shop inventory.
The bow is being sold as used, but it has never before been sold, has never been shot, and was only set up for the first time for the photos you see here.
- approximately 35" axle to axle
- up to 336 fps IBO speed
- 7" brace height
- 4.23 lbs (bare bow only)
Here are the specifics:
-Currently the bow is set up with a 31 inch Rock modules in 85% letoff. The draw length can be changed by changing the module set installed on the cam.
At this time I have the following draw lengths in stock.
25, 25.5, 26, 26.5, 27, 27.5, 28, 29, 29.5, 30, or 31 inches.
All modules are 85% Rock mods.
ONE module set of your choice will be installed on the bow when sold.
-70 pound limbs in factory Mathews Lost Camo finish. The limbs currently top out on my scale at nearly 74 pounds and can be set as low as 58 safely.
-The riser of the bow is in factory Mathews Lost Camo finish.
-The string and cable are in perfect shape as they are brand new. Since the bow has sat I did not want to leave the original factory string installed, so I installed a brand new set of Zebra Trophy from Mathews and installed them.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in matching Mathews Lost Camo finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I also have many other sights should you want something other than this one. Please just either send me a message or call to inquire about the sight you are interested in and I can let you know if I have it available and what, if any, difference in price there will be.
-The stabilizer is an Axion silencer 5 inch in Lost Camo finish. This is a nice stabilizer in both look and function. As can be seen, it has two Mathews Harmonic Dampeners and a Mathews Harmonic stabilizer in it to help both deaden noise and vibration as well as match the rest of the bow very well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine PowerLoc2 quick detaching 4 arrow quiver in Mathews Lost camo finish is also included with the bow. This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
-Owners manual, Mathews Decal and limb adjustment allen wrench are included.
- Mathews Monster hat is included.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
The case is pretty snug due to the long axle to axle length of this bow, but it is the only that I have that will fit this model.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******