Loaded, Mathews Monster Chill X Lost Camo Bow Package-w/Case- Most Draw Lengths
For more detailed photos and a full item description please click on the link provided below:
This bow is in VERY good used condition.
It was been hunted just one year and has sate as a backup since.
Bow Specs:
- approximately 35" axle to axle
- up to 336 fps IBO speed
- 7" brace height
- 4.23 lbs (bare bow only)
Here are the specifics:
-Right Handed
-Currently the bow is set up with a 26.5 inch mods in 85% letoff Rock modules. The draw length is changed by changing the mods on this bow. I also have many other module sets in either 80% or the 85% Rock Mods.
This particular model can be set up anywhere from 25 through 31 inches in draw length with the correct modules installed.
I have a lot of other 85% letoff Rock modules in stock, but not everything in that range.
******** IF YOU NEED ANY LENGTH OTHER THAN WHAT YOU SEE HERE, 26.5 INCH 85% MODULES, PLEASE CONTACT ME BEFORE YOU MAKE A PURCHASE TO VERIFY THAT I HAVE THE MODULE SET IN STOCK THAT YOU ARE LOOKING FOR. ***********
ONE set of modules will be installed on the bow and included at this pricing.
-70 pound limbs in Mathews Lost Camo finish. The limbs will top out at just over 72 pounds and can be set as low as 58 safely. I can set the limbs anywhere in that range for you prior to shipping the bow out.
-The riser of the bow is in factory Mathews Lost Camo finish.
-The string and cables are in good used condition. They are the original Zebra Trophy factory set from Mathews. I would rate them an 8.5 to 9 of 10.
-Peep sight installed, aligned, served into place.
-String loop is installed and ready to shoot
-The sight is a Brand New Axion GLX 5 pin in matching Mathews Lost Camo finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I have plenty of other sights in stock as well should you be looking for something different. Please just contact me BEFORE making a purchase to discuss the difference in pricing on any changes you would like to make as I CANNOT make any changes for you after a purchase is made here on eBay as per eBay's policies.
-The stabilizer is an Stokerized 6 inch in matching Mathews Lost camo finish. This is a nice stabilizer in both look and function. The Saturn dampener on the end and aluminum rod help to dampen noise and vibration. That Saturn dampener can be removed, changed to a heavier one, etc should you choose to do so. I do not have other dampeners or weight in stock to offer, so this one will be sold and delivered installed on the bow as you see it here.
-The rest is a Brand New QAD Ultra Hunter series drop away. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by the Easton/Beman company (as many of you I am sure are aware Easton purchased Beman years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 400, 340 or 300 spine-These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon arrows in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine SL2 quick detaching 5 arrow quiver in matching Mathews Lost Camo finish is also included with the bow. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. The quiver detaches with just the turn of one latch, and just as quickly, quietly and securely is attached back in place. There is a loop for hanging the quiver when it is detached integrated into the top of the quiver. When detached from the bow there is nothing left but a very light weight bracket.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******