Loaded Hoyt Carbon Defiant Bow Package- 28 to 30" - LEFT Handed, 60 to 70 lb - Realtree Xtra Camo
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1499 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow is in nice used condition. It has been hunted for three seasons and has been well cared for in that time.
Bow Specifics:
- 31" axle to axle
- 7" brace height
- 3.6 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-The bow is set up with #3 DFX cams. The bow is currently set up at 28 inches in draw length. With the #3 DFX cams, this bow is able to be set at 28, 28.5, 29, 29.5 or 30 inches ONLY. Please let me know where you would like it to be set and I will be sure to set the draw length for you prior to shipment.
-The riser of the bow is in the factory Realtree Xtra camo finish.
-70 pound limbs in factory Realtree Xtra camo finish. They will adjust from 58 to 71 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-Zero Torque cable guard helps eliminate unwanted torque from the bow when shooting.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in nice fantastic condition. They are a custom set from 60X that were installed just recently. I would rate them an easy 9+ of 10.
-Peep sight is installed, served into place, and is ready to shoot.
-string loop is installed and ready to shoot.
-The sight is a Brand New TruGlo Pro Series 5 pin in camo finish (not Realtree Xtra, but looks pretty good). Micro tune and tool-less adjustments make sighting in quick and easy. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight (I just put new batteries in it). The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a hybrid dampener in the sight to help even further reduce any noise and vibration.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Hoyt Model QAD Ultra Pro series drop away in Realtree Camo finish. This rest is made in incorporation of both the Hoyt and Mathews companies to fit the riser of the bow perfectly. As can be seen the rest carries the Hoyt name and logo. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro models will have a lock down feature that prevents the rest from vibrating or bouncing back after the rest as well as a LifeTime Warranty through the Hoyt company.
The rest is all set up and ready to shoot.
MSRP on the rest is $160
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by the Easton/Beman company (as most of you likely know Easton purchased Beman years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 340 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis 5mm carbon in 400, 340 or 300 spines- These are an additional $75 over the currently listed arrow.
*Easton 5mm FMJ's (Full Metal Jacket) in 400, 340 or 300 spines-These are an additional $85 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree Xtra camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Blade 4 arrow quiver in matching Realtree Xtra camo finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******