- Storefront
- >
- Right Handed 65 Pound Bow Packages
- >
- Loaded Hoyt Carbon RX-1 Ultra Bow Package -65- Black- #2 cam 25.5" to 29" REDWRX-RX1
Loaded Hoyt Carbon RX-1 Ultra Bow Package -65- Black- #2 cam 25.5" to 29" REDWRX-RX1
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1649 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow was used for one season. It was just serviced and has a new set of Threadz string and cables on it. Very nice overall shape for a used bow.
There are some scuffs on the under side of the top limbs from hanging the bow on a bow hook. They are cosmetic only and of no consequence, but I did want to note them for you.
They are shown in the 2nd photo listed.
Bow Specifics:
- 35" axle to axle
- 6" brace height
- 85% letoff
Here are the specifics:
-Right Handed
-The bow is set up with #2 Hyper ZT cams. The bow is currently set up at 29inches in draw length. With the #2 Hyper ZT cams, this bow is able to be set at 25.5, 26, 26.5, 27, 27.5, 28, 28.5 or 29 inches ONLY.
Please let me know at which of these draw lengths you would like the bow set upon making your purchase and I will be sure to set the draw length for you prior to shipment at no additional charge to you.
-The riser of the bow is in the factory Black finish.
-65 pound limbs in factory Black finish. They will adjust from 53 to just under 67 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Custom red color kit has been installed throughout the bow.
-Hoyt side plates have been installed in place of the stock grip. This helps to thin down the grip area to help further reduce torque and increase accuracy down range.
-The string and cable are in very nice shape as they were just installed. They are a custom set from Threadz in matching red as can be seen and are a very easy 9+ of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Fuse Cybex XT Micro tune 5 pin in matching Black finish. All pins are in .019 size. Micro-click adjustment knobs allow easy and precise adjustments for ease of sighting in. There is a rheostat light added to the sight. The light mounts in the very back of the sight bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. Second and third axis adjustments. 2 inch housing with orange high-vis sight ring. There are also 8 interchangeable colored Stealth Bands that are included (the Red is installed as can be seen in the photos). Nice overall sight.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a QAD HDX Ultra Pro series drop away in matching Red finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. The rest is all set up and ready to shoot.
MSRP on the rest is $150.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by Easton/Beman (as many of you know, Easton bought out the Beman compaany years ago now). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 400, 340 or 300 spines-These are an additional $85 over the currently listed arrows.
*Carbon Express Maxima Red in 250 size (400 spine)-These are an additional $95 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The matching Red discs have been installed to match the rest of the bow, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in matching Black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-Hoyt REDWRX soft case is included.
As can be seen the new hang tag is on the case, but it is a little dirty from sitting around.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******