- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- NEW, Loaded Bowtech BTX 28 Bow Package- 70 lb - Camo - 2019 Limbs- 25.5 to 28" draw length
NEW, Loaded Bowtech BTX 28 Bow Package- 70 lb - Camo - 2019 Limbs- 25.5 to 28" draw length
For more detailed photos and a full item description please click on the link provided below:
This bow is brand new, unregistered, and unshot.
It was set up for the first time for the photos you see here.
As many of you likely know, Bowtech had some limb issues in 2016/17 when they outsourced their limbs.
This bow is one that has new, 2019, in-house limbs from Bowtech installed at the factory.
Here are the specifics:
-Right Handed
-approximately 31" axle to axle
-333 fps IBO speed (at 28 inches as that is max draw length)
-4.1 lb (bare bow only)
-6" brace height
-PowerShift cam technology
-MicroSync Dial
-Trophy Ridge Fix5 micro adjust 5 pin sight
-Fuse Carbon Torch 6 inch stabilizer
-QAD Ultra Hunter rest
-Fuse Maxxis 6 arrow quiver
Here are the specifics:
-Right Handed
-This bow can be adjusted anywhere from 25.5 to 28 inches in draw length only. It is currently set at 27 inches, but I can change that for you.
Please just let me know where you would like the draw length of the bow set after making the purchase I can set that for you prior to shipping the bow out.
-60 to 70 pound, new, 2019 in-house limbs. The limbs will drop as low as 58 pounds and on my scale currently are topping out at just over 71 pounds on my scale safely.
Again, these are new, in house limbs from Bowtech.
-The riser of the bow is in factory Mossy Oak BreakUp camofinish.
-PowerShift cam technology allows you to set the cam in any of 3 performance settings. Setting 1 is the performance setting- this will give you better speeds with lower letoff. Setting 2 is the classic setting- this gives you a middle blend of both. Setting 3 is the comfort setting- the highest letoff, smoothest draw cycle, but does decrease your speed.
-MicroSync dial is included in this model from Bowtech. This allows the cams of the bow to be timed perfectly if ever need be while in the field without ever needing a bow press. This is one of the best advances in bow tuning that I have ever seen.
-String and cable are brand new and have not yet been set up, but I can set those up for you at no additional cost if you would like for me to do so prior to shipment.
-No peep sight has ever been installed, but if you would like me to do so I can install a RAD Super Deuce in either 3/16" or 1/4" sizing in black. There is no additional charge for this. Please just let me know you would like this done upon making your purchase and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has ever been installed, but again I will install one for you prior to shipment at no additional cost to you if you would like for me to do so. Please just let me know that you would like this done and I will be sure that a string loop is installed and ready to shoot prior to shipment.
-string stopper comes standard on this model and is included here.
-The sight is a Brand New Trophy Ridge Fix 5 Micro tune 5 pin bow sight. All pins are in .019 size. Micro-click adjustment knobs allow easy and precise adjustments for ease of sighting in not only on the housing, but also with each individual pin. There is a rheostat light added to the sight. The light mounts in the very back of the sight bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. Second and third axis adjustments. 2 inch housing with orange high-vis sight ring. Very nice all around sight.
MSRP on the sight is $110.
If you are looking for something different in a sight please just let me know as I have many other sights around and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The Green discs have been installed to match the rest of the bow, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
If you are looking for something different in a stabilizer please just let me know as I have many others around and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well
-The rest is a Brand New QAD hunter series drop away. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Carbon Storm 350 spine carbon arrows are included. These are made by the Easton/Beman company (as most of you are likely aware, Easton purchased Beman years ago now so the two run under different names but are one company). The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 400, 340 or 300 spines -These are an additional $85 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-New Bowtech Hat is included.
-Owners manual and Bowtech decal are included.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******