- Storefront
- >
- Right Handed 50 Pound Bow Packages
- >
- NEW, Loaded Mathews Stoke Bow Package- Stone Tactical - 40 to 50 lb -Right Hand
NEW, Loaded Mathews Stoke Bow Package- Stone Tactical - 40 to 50 lb -Right Hand
For more detailed photos and a full item description please click on the link provided below:
NEW
The bow was set up for the first time for the photos you see here. It has never been shot or used in any way.
As those of you who have been looking are no doubt very aware, this particular model and any bows in this draw weight range are extremely difficult to find!
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, or can offer the bow only at the price listed below.
Bow Specifics:
- approximately 27.25" axle to axle
- 5 and 5/8" brace height
- up to 314 fps IBO
(this is calculated at 27" since that is the longest draw length on this model. It would obviously be much faster if done at the typical 30" for IBO measurement)
- 3.78 lbs (bare bow only)
Here are the specifics:
-Right Handed
-Currently the bow is set up with 26 inch, 80% letoff
The draw length can be changed by changing the mods on the bow.
This bow can be set up anywhere from 21 through 27 inches in draw length in when the correct modules are installed.
I have only two module sets in stock.
These modules are the current 26, and a set of 24.5 inch.
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the two module sets listed above will be installed and included.
-The limbs are in Factory Stone Tactical finish. The limbs are 50 pound limbs, currently maxing out at 52 pounds. These limbs can be set anywhere from 38 through 52 pounds safely.
Please just let me know where you would like the draw weight to be set upon purchasing the bow and I can be sure to set that for you prior to shipment at no additional cost.
-The riser of the bow is in Factory Stone Tactical finish.
-The string is the original factory set of Zebra Trophy. They are in perfect condition as they have never been set up nor shot, but I can do that for you at no additional cost if you would like me to do so.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has yet been installed, but I can do that for you if you would like for me to do so. Please just let me know that you would like a string loop installed prior to shipment and I will be sure that one is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
-The rest is a Trophy Ridge Whisker Biscuit. The biscuit is one of the most secure rests you will find. The arrow remains completely contained, so you can simply nock your arrow and go shoot/hunt, never worried about any moving parts to fail or the arrow falling from the bow. In all shooting tests the whisker biscuit is every bit as accurate as any drop away on the market (though truth be told, shooter form can most definitely effect this).
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 500 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-Mathews owner's manual and Mathews decal are included.
If you would be interested in bare bow only, the bare bow can be purchased at a price of $775 (this does not include shipping nor any taxes- tax applies only in the state of PA).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******