- Storefront
- >
- Right Handed 65 Pound Bow Packages
- >
- GORGEOUS, Loaded Hoyt Carbon Defiant Bow Package- 26 to 28" - 65 lb limbs
GORGEOUS, Loaded Hoyt Carbon Defiant Bow Package- 26 to 28" - 65 lb limbs
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1500 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow is in EXTREMELY nice used condition. It has been shot indoor only by the original owner, very sparingly used at that, and has been very well cared for since new.
I don't think you will find a nicer Hoyt Carbon Defiant anywhere, especially in this finish!
Bow Specifics:
- approximately 31" axle to axle
- 7" brace height
- 3.6 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with #2.1 DFX cams. The bow is currently set up at 26.5 inches in draw length. With the #2.1 DFX cams, this bow is able to be set at 26, 26.5, 27, 27.5 or 28 inches ONLY. Please let me know where you would like it to be set and I will be sure to set the draw length for you prior to shipment.
-The riser of the bow is in the factory Buckskin finish, one of my favorites from Hoyt.
-65 pound limbs in factory Buckskin finish. They will adjust from 53 to nearly 70 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-Zero Torque cable guard helps eliminate unwanted torque from the bow when shooting.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in extremely nice used condition. They are a custom set of GAS strings that were installed fewer than 25 shots ago. There has not even yet been a peep sight installed (though I can do that for you prior to shipment).
This set was $200 installed, and is as close to new as they come so an easy 9+ of 10 in condition.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-string loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Hoyt moduel QAD Ultra Pro series drop away in Black finish. This rest is made in incorporation of both QAD and Hoyt to work with the Hoyt riser and as you can see carries the Hoyt name and logo. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro models have a lock down feature to prevent the launcher from bouncing up or vibrating after the shot. It also carries a lifetime warranty through Hoyt. The rest is all set up and ready to shoot.
MSRP on the rest when new was $180.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******