Loaded, LEFT Hand BOWTECH Prodigy Bow Package- 60 /70 lb- 25 to 30.5"
For more detailed photos and a full item description please click on the link provided below:
This bow was used through the past three hunting seasons. It is in very nice used condition as it has been very well cared for!
It was just completely serviced and is ready for you to put it to work.
-approximately 32" axle to axle
-up to 343 fps IBO speed
-4.2 lb (bare bow only)
-7" brace height
Here are the specifics:
-This bow can be adjusted anywhere from 25 to 30.5 inches in draw length. It is currently set at 28.5 inches, but I can change that for you.
Please just let me know where you would like the draw length of the bow set after making the purchase I can set that for you prior to shipping the bow out.
-60 to 70 pound limbs. The limbs will drop as low as 58 pounds and on my scale currently are topping out at just over 72 pounds.
-The riser of the bow is in Factory Black finish.
-PowerDisc cam technology allows you to set the cam in three performance settings. Setting 1 is the performance setting- this will give you better speeds with lower letoff. Setting 2 is the classic setting- this gives you the middle of both letoff and smoothness in draw cycle. Setting 3 is the comfort setting - this is the highest letoff, smoothest draw cycle, but does decrease your speed. The bow is currently set on the Performance setting.
-String and cable are in nice used condition. They were installed less than a year ago. I would rate them an 8.5 to 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-string stopper comes standard on this model and is included here.
-The sight is a Trophy Ridge HitMan 5 pin in Black finish. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. The light is adjustable in brightness by simply turning the end of the light up or down. I just placed 3 new batteries in it.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a CBE TorX Hunting stabilizer in 7.5 inch length and Black finish (CBE refers to it as 7.5 inches, but it truly measures 8 inches in total length). This is a great stabilizer in both look and function. As can be seen, it has a Doinker A Bomb on the end to help further reduce noise and vibration when shooting. It is also equipped with 2 ounces of black nitride, stainless steel weight that is attached to the end of the stabilizer. This can be removed or added to in order to adjust the weight of the stabilizer to your shooting needs.
MSRP on the stabilizer is $80.
As can be seen in the final photo, the stabilizer will be removed to safely place the bow in the case.
If you are looking for something different in a stabilizer please just let me know as I have many others around and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well.
-The rest is a Bowtech model QAD Ultra Pro Series series drop away in Black finish. This rest is made in incorporation of both the Bowtech and QAD companies to fit the riser of these bows perfect. As can be seen it also carries the Bowtech name and emblem to match the bow. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. All Pro models have a lock down feature to prevent the rest from bouncing back up or vibrating after the shot and carry a LifeTime Warranty through QAD.
The rest is all set up and ready to shoot.
New MSRP on the rest is $165.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Easton Carbon Storm 400 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 340 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton FMJ's (Full Metal Jacket) in 400, 340 or 300 spines -These are an additional $85 over the currently listed arrows.
*Carbon Express Maxima Red in 250 or 350 spine-These are an additional $95 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a quick detaching CBE Mod 5 quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely with a locking latch that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the locking latch.
MSRP on the quiver new is $109.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******