Loaded Mathews ChillR Bow Package- Custom Lost Camo - Chill R- 50 to 60 Pounds
For more detailed photos and a full item description please click on the link provided below:
This bow was used sparingly since it was released and has been well cared for in that time.
This is a one owner bow, and has had many parts custom dipped in Mathews Lost Camo.
Definitely a great looking bow and in fantastic overall used condition.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not all that interested in selling bare bow only.
Bow Specs:
- approximately 33" axle to axle
- up to 342 fps IBO
- 6.125" brace
- 3.95 lbs bare bow
Here are the specifics:
-Right Handed
-Currently the bow is set up with a 30 inch modules in 70% letoff. The draw length can be changed by changing the module set installed on the cam.
I do not have other modules in stock, but they are not at all that expensive to purchase online should I not be able to provide what you need.
If you need something other than the currently installed 30" modules please let me know so that I can try to locate those for you.
-60 pound limbs in factory Mathews Lost camo finish. The limbs currently top out on my scale at 65 pounds and can be set as low as 58 safely.
-The riser of the bow is in Factory Mathews Lost Camo finish.
-The string set is about 2 years old. It is a custom set that were $150 installed at that time. They are in nice used condition, and I would rate them an 8 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is an HHA single pin. It is a fixed single pin. I am not sure of the model. It has been custom dipped to match the rest of the bow.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Doinker in Lost camo finish. It is approximately 4.25" in length.
-The rest is a Trophy Taker drop away. It is all set up, timed and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The yoke rings, cable guide and string stop have been custom dipped to match the Lost camo finish.
-Mathews Monster hat is included.
I am not really interested in selling bare bow only, but if you would like to make an offer you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******